| Place of Origin: | China |
|---|---|
| Brand Name: | Desun Uniwill |
| Model Number: | DST420 |
| Minimum Order Quantity: | 1 |
| Price: | Determined by the number of specific orders |
| Packaging Details: | Carton packaging |
| Payment Terms: | L/C, D/A, D/P, T/T |
| Supply Ability: | 1000 |
| Product Name: | Online Self-cleaning Turbidity Sensor | Range: | 0-1000NTU |
|---|---|---|---|
| Precision: | ＜5% | Output Signal: | Support RS-485, MODBUS Protocol |
| Power Supply: | DC 6~12V, Current <50mA (when Not Cleaned) | Sensor Size: | Φ32*161mm |
| Principle: | 90° Scattered Light | Sensor Cable: | 5 Meters (default), Can Be Customized |
| High Light: | High Precision Water Turbidity Sensor,161mm Water Turbidity Sensor,water turbidity meter 1000NTU |
||
High-precision Turbidity Analyzers For Environmental Monitoring / Turbidity / Total Suspended Solids
² Digital sensor, RS-485 output, support MODBUS
² With automatic cleaning brush to prevent contamination and eliminate air bubbles
² Strong anti-interference ability, free from ambient light and chromaticity
² 90° scattered light principle, with fiber optic technology for better repeatability
1. When using the throw-in sensor, avoid the sensor hitting the wall or other facilities caused by water flow. If the water flow rate is too fast, the sensor must be fixed.
2. There should be no obstructions in front of the measurement. For example, fluorescence sensors should be avoided from light.
3. The water depth position where the sensor is installed should not exceed 2 meters from the horizontal, and the installation should be based on the fluctuation of the water flow. The water depth of the location should not be less than 30 cm. (Adjustable according to the measured water body)
4. The sensor should be installed in a location where there is no air bubbles to prevent air bubbles from affecting the measurement data of the sensor.
5. Do not use the sensor's own cable to hoist the sensor, and install a cable protection device to prevent excessive tension between the cable and the sensor, causing the cable to break.
6. The sensor should not be installed with the measuring side facing upwards, it can be installed vertically downwards or horizontally.
7. If you use this product in the water diversion tank, please consult the company's sales staff to confirm the specific installation requirements.
| Product | Fiber optic turbidity sensor | Self-cleaning turbidity sensor |
| Model | DST410 | DST420 |
| Principle | 90° scattered light | |
| Range | 0 to 4000 NTU | |
| Precision | 0.1NTU | |
| Resolution | <5% or 0.3NTU | |
| Protection level | Ip68 | |
| Sensor interface | Support RS-485, MODBUS protocol | |
| Assembly | Input type | |
| Power information | DC 6~12V, current <50mA (when not cleaned) | |
| Probe cable length | 10 meters (default), can be customized | |
| Housing material | POM/SS316 | |
| Optical window | optical fiber | |
| Self-cleaning system | No | Have |
Q: What parameters do you need for product selection?
A: Application, Range, Power supply and Output signal.
Q: How about the quality of the managements?
A: We have a complete quality control system, our products will be fully pre-inspection before shipping to you. We have the certification of ISO, CE, we could send the certification test of our company to you.
Q: Can you offer OEM services?
A: Yes,we support OEM and ODM products according to your requirements.
Q: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
