Place of Origin: | China |
---|---|
Brand Name: | Desun Uniwill |
Certification: | CE |
Model Number: | DS-380 |
Minimum Order Quantity: | 0~100 pcs |
Price: | $280.00 - $400.00/ Piece |
Packaging Details: | Carton packaging |
Delivery Time: | 7~ 15 working days |
Payment Terms: | L/C, D/A, D/P, T/T |
Supply Ability: | 0~1000 pcs |
Model: | DS380 | Principle: | Fluorescence Analysis Method |
---|---|---|---|
Measuring Range: | 0~20mg/L | Response Time: | 3 Seconds |
Accuracy: | 1% | Protection Level: | IP68 |
Installation: | Submersible | Temperature Sensor: | NTC |
Temperature Range: | 0~50°C | Temperature Accuracy: | ±0.2°C |
Output: | Support RS-485, MODBUS Protocol | Power Supply: | DC 6~12V, Current <50mA |
Size: | Φ26*155 Mm | Probe Cable Length: | Default 5 M |
Fluorescent Cap Life: | 1 Year | Maximum Working Pressure: | 3bar |
Housing Material: | SS316/Titanium Alloy | ||
High Light: | DS380 Dissolved Oxygen Monitor,Fluorescent Cap Dissolved Oxygen Monitor,optical do probe 50mA |
● Easy use, no membrane, no electrolyte.
● Long lifetime, maintenance free and less calibration.
● No flow dependency and fast response.
● Immune to electrical interference, no chemical interference.
Item | Parameters |
Model | DS380 |
Principle |
Fluorescence analysis method |
Measuring range | 0~20mg/L or 0-200% saturation |
Response time | 3 sec |
Accuracy | 1% |
Protection level | IP68 |
Installation | Submersible |
Temperature sensor | NTC |
Temperature range | 0~50°C |
Temperature accuracy | ±0.2°C |
Output | Support RS-485, MODBUS protocol |
Power supply | DC 6~12V, current <50mA |
Size | Φ26*155 mm |
Probe cable length | Default 5 m, customized 10m, 15 m and 30 m cable |
Fluorescent cap life | 1 year |
Maximum working pressure | 3bar |
Housing material | SS316/Titanium alloy |
Fluorescent cap daily storage
Put it in a protective cover with a moist sponge when not in use, so that the sensor stays wet for a long time. If the head of the sensor's fluorescent cap is dry for a long time, it will cause drift of the measurement result, so it needs to be immersed in water for 48 hours before continuing to work.
Notes:
1) Avoid exposing the inner surface of the fluorescent cap to sunlight.
2) Do not touch the fluorescent film with your hands.
3) Avoid any direct application of mechanical stress (pressure, scratches, etc.) to the fluorescent film during use.
Photos